Yet Another Pi & PiCam PRUSA bracket (yappp)
Yet Another Pi & PiCam PRUSA bracket (yappp)
3D
Published 2021-06-18T09:14:48+00:00
Here is another Raspberry Pi V2 camera bracket. The bracket mostly snaps together but requires two screws and 2 nuts to assemble. One M2 square nut and and screw to attach the Camera to the idler arm and one M3 hex nut and screw to hold the idler arm to the Frame Attach.
The Raspberry Pi computer is held in place by a customizable bracket. Simply edit the case dimensions in the FreeCAD spreadsheet and export a mesh. The mount snaps onto the top bar of the PRUSA MK3S stabilized by the Frame Attach Support. Z axis and Y axis camera placement is set with a single knob. You may slide the mount left and right along the top bar for X axis positioning.
The only part requiring printing support is the Pi Bracket. A single support from the build plate to the rear case latch is enough to have the part print out successfully. A PRUSA Slicer project file is included, or see the screen shot.
| Date published | 18/06/2021 |