Zoom F1 Digital Recorder Clip Battery Door *Updated*
Zoom F1 Digital Recorder Clip Battery Door *Updated*
3D
Published 2021-04-22T08:33:17+00:00
Took the time to design and print a replacement retention slider clip for the Zoom F1 digital recorder. Figured I'd share it here with anyone who needs one. Used the specs for the original part and reinforced it as best as possible with the space available. Flip on it's side and no support material is required. To install, remove two small philips screws from inside of battery door. Remove plastic retention tab. Make sure to plane the spring contact surface with a razor blade to make flat. Install clip and re-assemble.
Updated design as of 6/10/21. Improved angles and size. V_8.1
Flip part 90 degrees on it's side. Does not require support. Print in ultra fine with ABS seems to be the best option I've found thusfar.
| Date published | 22/04/2021 |
| Time to do | 5 - 8 minutes |
| Dimensions | 10.5mm x 4.46mm x 3.89mm |
| Support Free | YES |
