Cube Basket
Cube Basket
Published 2014-04-11T19:18:10+00:00
Designed to not require support structure, handy for putting any small printed test pieces in, or anything really.
Examples -
Black (6cm x 6cm x 6cm) -
Printed on a Flashforge Creator Dual with ReplicatorG software, which uses the Skeinforge slicing software.
Un-tick the option to generate support structure.
The angles used for the basket mesh should be shallow enough to not need support.
Print settings were :
Material : Black PLA
Extruder temp : 200 degrees C
Print Bed Temp : 50 degrees C
Support Structure and Raft option : Off
Feed Rate speed : 41
Travel Rate speed : 70
Layer Thickness : 0.27 mm
Took about 2 hours 47 minutes to print at a layer thickness of 0.15mm.
Yellow (7cm x 7cm x 7cm) -
Printed on Up! Mini with Up! slicing software.
Print settings used for this example :
Layer height 0.20 mm
Infill 50%
Took 4 hours 45 minutes to print, and 26.2g of filament.
Date published | 11/04/2014 |
Time to do | 285 - 285 minutes |
Dimensions | 70mm x 70 mm x 70mm |
Complexity | Easy |