moving table model
moving table model
Published 2014-06-09T08:03:50+00:00
This is a model for a full size table that i had designed to be made in bamboo.
Instructions : print all the parts at 0.25 mm layer height using a .4 or less nozzle. The parts are interconnected using a m3 threaded rod and nuts. The battery holder is mounted in the center.
Print 6 sets of the leg set and 2 sets of the cross brace set.
For anybody interested in making it i would be making a detailed assembly diagram.
The motors are optional. The model can be moved manually also if needed. I used 1:100 ratio 6v geared dc motors. Also a lot of plastic lubricant is needed and it tends to jam up the legs are joint together using m3 x 12 mm hex nut and bolt.
0.25 mm layer height
Date published | 09/06/2014 |
Complexity | Medium |