NEMA17 to NEMA23 adapter with threaded holes
NEMA17 to NEMA23 adapter with threaded holes
3D
Published 2017-01-19T09:56:28+00:00
A simple to use NEMA17 to NEMA23 adapter I've made for myself to change my motor.
The extra in it is that it has threaded holes, so you will only need the M3 and M5 screws.
Crazy idea to exclude the nuts, but it works surprisingly good!
Printed out from PLA, with 0.125mm layer height, and the screws hold the big NEMA23 in place nicely.
Do not use an electric screwdriver!
Unless you print this out of metal, of course. :)
(Note: When I printed my version, I did not bother running out the white filament when changing to black, so the first layer is white, and the rest is black. The blackness is barely visible on the photo, but the first white layer is there. And as you can see, the NEMA23 does not have all holes for 4 screws. Only 2 screws are holding it to the adapter)
Should be printed with at least 0.125mm layer height to get the threads right.
| Date published | 19/01/2017 |
| Technology | FDM |
| Complexity | Medium |
| Support Free | YES |
