Soldier 76 Pulse Rifle Overwatch
Soldier 76 Pulse Rifle Overwatch
3D
Published 2017-06-12T18:07:07+00:00
I made these files from scratch and it takes a long time to print.
It is mostly held together with magnetic discs, (i think) 50x 8mm diameter by 4mm dpeth, 16x 5mm by 3mm discs, a few 3mm hex nut screws and glue.
UPDATE: I fixed and improved the channels for running lights and adjusted the angle of the light up tabs. The reciever is the white center section and the black start of the barrel. I am still working on an assembly guide too. Once the models are approved i will remove the old ones to avoid confusion.
They hardest parts to print are the top stock parts. You will need support and probably a brim or a raft. For the blue panels you will need to print it twice and then mirror each piece and print those twice.
The barrel assembly needs a 3/4 inch PVC pipe.
| Date published | 12/06/2017 |
| Material Quantity | 4.5 kg |
| Dimensions | 110 cm x 15 cm x 40 cm |
| Technology | FDM |
| Complexity | Difficult |
I wanted to pop back and say THANK YOU so much for this file. I printed it at 75% and was under crunch time for DragonCon, so I really could have done a better job assembling it. I just did a casual cosplay for that con, but am hoping to do a full shoot soon with the coat and all the other details. The gun is a BEAST!