STL Miniatures - City of Firwood - Small House. One of several fantastically created buildings that are a pleasure to print. No supports needed for real. Only problem with these early models is the door, The door relies on a small printed pin to pivot on, mine broke several days after painting. To remedy this, I edited it to have a 2mm hole through the door vertically, and then used my pin vise to drill a hole on the bottom. Amazon sells 2mm steel rods. I simply cut one to length and fixed my door to the new rod. Total Print Information: 62hrs 15min (372 grams of Filament) Lost track of Resin Usage.