lazlot's Print of Filament guide tube holder for FlashForge Creator Pro 2016
Community Print 3D Print of Filament guide tube holder for FlashForge Creator Pro 2016
Published 2018-09-08T19:33:05+00:00
3
1
Printed on: PowerSpec 3D Pro
Material: PLA
Description
This was the first thing that I have ever 3D printed and it’s awesome!
I just picked up a PowerSpec Ultra 2.0 (which is an OEM version of the FlashForge Creator Pro). I immediately noticed that the alignment of the factory filament feed tube guides were way too close to the edge of the machine. This was causing feed issues because the filament was pulling against the edge of the spool...and it also caused the filament to become unraveled and wrapped around the outside edge of the spool.
Your modified filament guide fixes the problem and it fit perfectly. FlashForge should include this with their machines. :)
Since this was my very first print I did not know how much of a fill setting I should use…or if I should print it as a solid object. I ended up printing it with a PLA in Simplify 3D with a 40% fill. It seems pretty strong…maybe overkill. :)
Thanks for sharing!