CraigJ's Print of Mercy's Caduceus Blaster -Overwatch-
Community Print 3D Print of Mercy's Caduceus Blaster -Overwatch-
Published 2016-08-15T22:51:26+00:00
0
0
Printed on: Printrbot Simple Metal
Material: PLA
Description
Printed in 0.2mm layers of red PLA.
Of all of the parts the small "loop" was the most difficult to print
This thin part with compound angles required supports and a very slow print speed.
The bigger parts printed with no trouble without supports, but were long prints (about 7 hours each)