Printed with Wanhao i3 v1 UPGRADED with z-braces, dampeners, and a RAMPS board with ABL and DRV8825 stepper drivers.
ABS with no enclosure and fan at 50%.
NO infill. ( I pretend to fill it with clay and sand )
4 walls. ( 4mm nozle @ 235 degrees C.)
Support ONLY touching the bed.
Heated Bed @ 90 degrees C. + BuildTak.
0,05 MIND BLOWING LAYER HEIGHT! ( Amazing design btw )
Time to print 7:30 hs more or less...