tylergilson's Print of The Citadel
Community Print 3D Print of The Citadel
Published 2021-03-15T18:01:39+00:00
0
0
Printed on: Creality Ender 3 v2
Material: PLA
Description
Printed the base with Hatchbox Concrete Gray PLA, 20% Infill, 3 Perimeters, 0.12mm Layer Height, 0.4mm Nozzle, 50mm/s, on a Raft.
Printed the Tower with Hatchbox Bronze PLA, 20% Infill, 3 Perimeters, 0.12mm Layer Height, 0.4mm Nozzle, 30mm/s, on a Raft.