Since it is designed not to require a supports.
It is not necessary to post-process after output.
It is recommended to use PLA.
It is a 1/4 scale model of the real thing.
This model is capable of bolt action.
I used a 0.3mm nozzle.
Layer height is recommended 0.1mm.
If the nozzle you use is larger than 0.3mm,
If you enlarge the model, it will print well.
Because the model is detailed, it will look great even with larger outputs.
However, if you get a larger output, you need to use something larger than the volts I suggested.
It may be uncomfortable for you.
For correct assembly, please watch my youtube video.
Channel : https://www.youtube.com/c/CUBEBlueSky
[ Wrench Bolt Inform ]
M3x8mm Wrench Bolt :