Deku Mask
Deku Mask
3D
Published 2017-03-20T11:15:07+00:00
You've met with a terrible fate haven't you?
- Happy Mask Salesman
There are a couple of Deku Masks floating around the web, but I've always wanted something with a little more texture. I designed this in Blender and printed it out in ABS. Once I had my master, I vacuformed it, using HIPS and painted it. Clear plastic theatre gels were cut and inserted in the eyes.
This mask will look equally good printed in PLA or ABS. The files are scaled to precisely fit the build plate of the Ultimaker 2, but feel free to scale up or down as needed. This mask should be printable without supports, due to the conical design.
*update* I have uploaded the mask cut in halves, and quartered. I haven't printed any of these so you may need to print with supports.
| Date published | 20/03/2017 |
| Benoetigte Zeit | - 1440 Minuten |
| Menge an Filament | 38.51 meters |
| Dimensionen | 200mm x 196.0mm x 102.0mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Medium |
| Support Free | YES |
PETG at 3mm, then the usual sanding, filling, painting routine.