A SHARK
A SHARK
Published 2020-08-29T11:08:37+00:00
Printable Shark Mechanical Toy
Assembly is required.
Assemble instruction is in my youtube channel
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*Lubricating moving and rolling parts with silicone grease is recommended.
Layer height:
0.10mm : Crank_01,02, Crank pin_01, 02, Gear_01,02, Gear_AxleRing_01,02, WarmGear_AxleRing_01,02, Head_03, Head_04.stl
0.18mm : All the Rest
Shell count: 3
Fill density:
100% : Head_01.stl
15%~20% : All the Rest
Time to do: about 600 - 700 minutes
Technology: FDM
Material: PLA or ABS
Dimensions: about 225mm x 130mm x 100mm
Material Quantity: about 110g
Date published | 29/08/2020 |
Benoetigte Zeit | 600 - 601 Minuten |
Menge an Filament | 110 |
Dimensionen | 225mm x 130mm x 100mm |