AEMINI06 - Regular Folks
$2.00 AEMINI06 - Regular Folks
3D
Published 2023-07-27T05:31:25+00:00
In this crazy old world, one needs regular folks.These are the real heroes I tell you! Keep the world in motion.
Look no further than this amazing set of minis to find your regular folk. Karoly Ksurgo brings the best minis around yet again with this special set of regular folks.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
This set includes both unsupported and presupported miniatures
| Date published | 27/07/2023 |
| Price | $2.00 |