AEPWAR02 - War Trenches 2
$12.00 AEPWAR02 - War Trenches 2
3D
Published 2023-02-28T10:24:51+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
The War series of terrain was created by Colin Christenson. War Trenches is based on our 2nd published set, Peaceful Gardens, but diverges greatly from the unspoiled grounds. This set works and integrates completely with the entire Peaceful series of terrain, but this one is focused on the battlefields, of combat and tight trenches. This one is focused on War.
Colin Christenson, Nasos Maloudis, and Will Walker all cooperated on this set, with Colin taking the lead. Most of this set was filled with requests from our discord team, especially Windy Trusty. It is because of her support and encouragement that we set this set into quick production.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 28/02/2023 |
| Price | $12.00 |
| Support Free | YES |
Colin Christenson is at it again! This time with more war! here is an exploded fox hole. Painted with joy by Miss Windy