Alan Walker Walkerverse pendants
Alan Walker Walkerverse pendants
Published 2022-11-22T09:36:53+00:00
For all Walkers who would like a copy of the pendant made for the release of Alan Walker's album "Walkerverse". After i recently mentioned that i was trying to make this a few people have asked me to share the file, so here it is. One of the files in this project is made so you can put a string through at small hole in the pendant, the other is just the logo. However if you decide on using the pendant with the hole you need to be carefull, the hole is only connected to the pendant with a piece of platic about 0.8mm wide, therefore i would recomend that you use some sort of either stronger plastic or get it printed in metal if you want to use it as a wearable piece of merchandise. i ask you to only make these as a fun little object and to not sell the file or printed objects, however if you want to make corrections to the file or give feedback to me you are very welcome to do so.
V3 Update
Scaled the thickness so it now is 4.2mm thick instead of 2.1mm
Made the lines around the logo thicker to 1mm instead of 0.4mm
Changed a bit in the fillets to make them work wit the new wall thickness
Given some of the edges a chamfer to make them less "harsh"
0.08mm layerheight
0.4mm nozzle if you want perfect detail 0.2mm nozzle is recomended
Date published | 22/11/2022 |
Benoetigte Zeit | - 90 Minuten |
Dimensionen | 50mmx50mmx3mm |
Support Free | YES |