Anycubic Photon Mono Z Axis Spacer for Magnetic Build Platform.
Anycubic Photon Mono Z Axis Spacer for Magnetic Build Platform.
3D
Published 2021-03-22T16:37:27+00:00
A simple set of spacers which, when installed, raises the Z axis homing height on the Anycubic Photon Mono. This is particularly useful if installing a magnetic build plate as I found the Sovol plate made Z axis adjustment impossible.
I have included 1 mm, 2 mm and 2.6 mm spacers although I used the 2 mm on my Mono which was more than enough to allow adjustment. The distance between the screw holes is 8 mm so these may be useful for other printers. If you need a different height just use the 1 mm file and scale the Z axis in your slicer of choice.
Print with your material of choice. Due the the size of the part I printed this at 0.15mm layer height at 100% infill and with a 0.6mm nozzle print time was under a minute.
| Date published | 22/03/2021 |
| Benoetigte Zeit | 1 - 2 Minuten |
| Menge an Filament | 0.34 gramms |
| Dimensionen | 80 mm x 160 mm x 2 mm |
| Support Free | YES |