Camera grip (no support needed)
Camera grip (no support needed)
3D
Published 2020-07-13T18:07:43+00:00
This is a simple camera grip I designed for use with my camera and phone. It's designed to be 3D printed without any support material, so is built from a few parts that need to be glued together.
That also means you can use a number of different materials to make the finished grip look how you want: for example I used bronze and wood-infused PLA, plus some chrome model paint, to make the steampunk-inspired version in the photos here.
You'll need a 1/4" whitworth bolt for the top, and nut for the bottom. They can be fixed inside the end pieces using some glue and the small hexagonal inserts. For glueing it all together I used a two part epoxy as it needs to be strong enough not to break and let your camera fall.
Also, in case you need to customize the design, the OpenSCAD file is included here.
| Date published | 13/07/2020 |
| Support Free | YES |