CREDIT CARD WALLET (BLANK)
CREDIT CARD WALLET (BLANK)
3D
Published 2023-02-24T18:14:54+00:00
Completely 3D printable bank card wallet for 5 credit cards and ejection feature. Nice modern look and stylish as well. Created and designed in Fusion 360.
Printer: modified Ender 5
Filament: extrudr Pla black & yellow
Resolution: 0.15mm for all parts
Printing time: ~4-5 hrs
Infill:
Frame: 30-50%
Everything else: 100%
Both of the Wallet's Frame can each be printed with flat side faced the bed. No supports needed there.
Side latches (2 needed) and ejector should be placed on the side (90°). Support everywhere.
Both frame parts must be glued together
Side latches must be glued on the frame´s inside (to hold the cards in place). Make sure that the ejector can move freely.
Important information: Until now not tested and printed! Do at your own risk!
Printer: modified Ender 5
Filament: extrudr Pla black & yellow
Resolution: 0.15mm for all parts
Printing time: ~4-5 hrs
Infill:
Frame: 30-50%
Everything else: 100%
Both of the Wallet's Frame can each be printed with flat side faced the bed. No supports needed there.
Side latches (2 needed) and ejector should be placed on the side (90°). Support everywhere.
| Date published | 24/02/2023 |
| Benoetigte Zeit | 240 - 300 Minuten |