Cupcake Dragon - Piggy Bank - No Supports Needed!
$6.00 Cupcake Dragon - Piggy Bank - No Supports Needed!
3D
Published 2022-04-04T10:28:19+00:00
I wanted to make something cute and voila... Cupcake Dragon! I've also been wanting to make a coin bank for awhile and thought this was the perfect shape for it.
12-15-22 Update - Made the keychain version a loop hole for jumprings and also included a pencil topper version. I made the horns thicker on them also so that they aren't so delicate when printed this small.
**Update** Added a few more versions to the Cupcake Dragon: container, twist container and coin bank version 2 with a push and twist cap (don't know the name for it ^_^). I wasn't going to do the twist container because of it potentially not lining up correctly with its tail.. but I thought I would do it anyway. You can leave it a little loose if need be.
Also, I changed the cap on the original coin bank and tweaked that area a bit to make it print cleaner. I also flipped its cap upside down so that will print cleaner as well.
*Print the cap last, I made it slightly loose for my printer and if it is to loose or to tight for your settings you can enlarge or reduce the size by 1%.
To make the files not so confusing, I separated them all into their own folders.
Please feel free to share images of your prints, I would love to see them! ^_^
For personal use only!
If you are interested in selling 3D Prints of my models (Files are never for redistribution in any way), visit my Tribes Page or Patreon for a commercial license and other monthly perks:
https://www.patreon.com/MysticSaige / https://www.myminifactory.com/users/MysticSaige?show=tribe
No Supports needed!
3+ perimeters (the more the stronger it will be).
15%+ infill.
Make sure to enable bridge settings!!
Adding a few more top and bottom layers will help beef up the coin bank part of the model.
!! Make sure to have good bed adhesion or a brim !!
| Date published | 04/04/2022 |
| Price | $6.00 |
| Support Free | YES |