Devil's Dice Box
Devil's Dice Box
3D
Published 2022-11-16T09:52:09+00:00
The devil's box can hold many things... mostly dice though! This puppy can give any DM the shock, awe and suspense for any important dice roll. Just remove the demon's head to find a hole to put your dice and open the box to see what fate the Devil's box has for your character!
This print was printed around 205C. It's recommended to put supports on the hinges and pentagrams for the case. For the doors printing them standing up with a brim and supports for the claws. Demon's bust could use them on the horn's and the mouth if it's not too difficult to remove(increasing pattern interface spacing usually makes removal easier). The hinge poles can be placed flat on their side on the build plate with a brim for easier printing and more durability. You can print the case either from the bottom with my logo or with the infernal script on the back whichever is easier. Overall Assembly is straight forward with NO glue; place on the door and slide the poles through the top(demon's bust is meant to be a removable top)
| Date published | 16/11/2022 |
| Menge an Filament | 736g |
| Dimensionen | L: 191mm H:140mm (without bust with is 197mm) W; 203mm |