DIY Electric Snowboard 3D Print Pieces
$20.00 DIY Electric Snowboard 3D Print Pieces
3D
Published 2022-12-13T09:59:05+00:00
Here is the parts list:
tractionboard-v001: The yellow foot pad. Omni-directional; print two if you can't or don't want to use traditional foot bindings.
motormountarmr-v004/v005 & motormountarml-v004/v005: Right and left motor mounting arms, respectively. v004 sits higher, beneficial if you go for a build with a thicker wheel for your own project. Otherwise, for this kit, print v005
tread-v003-halfa & tread-v003-halfb: The two tread halves for the hub motor insert.
motormountreinforcingplate: I recommend ordering the stainless steel insert off Shapeways here, but in the mean time feel free to print off one of these as a placeholder, or if you have a CNC, mill your own.
I recommend printing in at least ABS; Nylon if you can swing it. 100% solid all parts. You'll need a printer capable of printing at least 25cm x 25cm. You'll burn through probably at least 3KG of filament printing everything
I recommend printing in at least ABS; Nylon if you can swing it. 100% solid all parts. You'll need a printer capable of printing at least 25cm x 25cm. You'll burn through probably at least 3KG of filament printing everything
| Date published | 13/12/2022 |
| Price | $20.00 |