DJI Mavic Pro 1 Angled Wall Mount
DJI Mavic Pro 1 Angled Wall Mount
3D
Published 2020-09-14T08:36:32+00:00
30° Wall mount for the DJI Mavic Pro 1 (not sure if it fit's the 2, don't own one to test).
Wanted the drone on the wall but not just laying up against it like most mounts. Previously I made a mount to angle my Vortex 285 quads on a wall so decided to do similar for my Mavic.
Mount allows the Mavic's rear arms to snugly fit inside the brace so it won't fall out easily.
Can be printed with no supports for the best look. Print with a brim to ensure it stays on the plate when it's working on the higher parts. Infill of 20% or more to retain structural integrity. My wall thickness is 1.2mm to ensure it's strong enough.
I recommend using screws 70mm or longer with appropriate wall plugs. Front to back of the screw hole is 50mm deep and 4mm wide.
| Date published | 14/09/2020 |
| Support Free | YES |