Epax E10 chamber heater case
1,612
views
39
downloads
2
collections
0 comments
Loading comments... 
Epax E10 chamber heater case
3D
Published 2021-01-26T09:33:36+00:00
5
0
Add to Collection
Description
Epax E10 chamber heater case. Allows for 110V automated chamber heating for hard to print resins in your E10.
Adding a heater to a 3D printer increases risk of fire, DIY at your own risk.
How it works:
- Remove internals from Heatbud and install into printed case
- Use Inkbird controller to set chamber temps for stable printing conditions (currently use 27c). Can turn on/off via wifi on your phone with free app
- Consistent temps mean better printing with challenging resins such as Siraya Blu
- Completely stand-alone solution independent of E10 electronics
Print Settings:
- 0.2mm or 0.3mm FDM
- PETG Filament
- Supports required (see snapshot of Simplify3D)
Extra PartsNeeded:
- Honeywell Heatbud heater
- Inkbird C929 (or similar) temp controller
- M3x16 screws
- M3x10 screws
- M3 heat set inserts
Modifications to E10
- Minor cut / notching of orange cover to clear wires
- NO modification of E10 electronics
Lizenz
Technical Information
| Date published | 26/01/2021 |
More Information
Object Parts