Fidget TNT Detonators
$3.00 Fidget TNT Detonators
3D
Published 2024-04-09T08:30:31+00:00
Hey folks!
These are the TNT print-in-place Fidget Detonators!
Both metal and wooden versions are included in this download!
Added a STL + 3mf sign and also the handles that go inside the rod.
Please read the printing instructions!
1. The internal spring is supported by small strings that connect to the walls - This is to prevent it and the handle from moving side to side, when the print completes just push the handle with some force inside (there are 2 visible strings between the cover and the handle)
2. change your Bambu Slicer wall generator to ARACHNE for these strings to print - It's a safeguard although I was able to print them without issues also with classic - Without the supporting strings. In CURA you don't have to change anything.
3. The internal spring may warp upwards a bit while printing and might make some noises hitting the nozzle - Don't worry as long as it's not breaking or snapping and fusing with the walls...
4. Use good PLA - I did not test Silk PLA.
5. NO SUPPORTS!
6. Bolts threads are a bit fragile so careful.
A kind request, Please help supporting the work of all 3D artists!
Do not sell or share digital files bought here and on other sites.
Buying this model DOES NOT allow you to sell physical copies of it, It is for personal use only. All my original designs are Copyright protected.
If you want to sell my prints commercially, you can join my Patreon:
https://www.patreon.com/3DGeex
Check out my social media accounts to see what I'm doing next:
https://www.instagram.com/3dgeex
https://www.tiktok.com/@3dgeex
https://youtube.com/@3dgeex
Thanks, Michael - 3DGeex
3D PRINTING SETTINGS
All instructions mentioned above,
Print with 2-3 walls
All instructions mentioned above,
Print with 2-3 walls
| Date published | 09/04/2024 |
| Price | $3.00 |
| Support Free | YES |