Garghuls
$8.00 Garghuls
Published 2021-05-04T10:38:42+00:00
SPAWNS OF THE GREAT ROT
Chapter: Ghuls
Subject: Garghuls
Description
Garghuls, mutated Ghulings, turning to bring terror in the sky with even more ferocious abilities. With an ear-piercing shriek, then will incarcerate you before swooping down and tearing you to pieces. Not only have they mutated wings, but in size as well, these Garghuls have grown to unnaturally large proportions. Making even a more terrifying threat.
Details
Garghuls come on a 50mm customized Base.
Get 40% discount on this model by joining my Patreon!
3D Elements Printing guide
- Models validated and supported for 50um LH (0,05mm)
- If you cannot print them on mono printers I suggest to increase cure time (even with fast resins even to 2.6s)
- I suggest 5 burn in layers (you can also add 2 transition layers)
- Raft is thin to prevent raft separation and resin wasting + FEP degradating
- If you struggle with removing supports please use warm water to make them soft then remove it
- Cure your model after removing supports and be gentle since some of the parts are thin.
General info of codes:
Presupported = heavy presupports
L-Presupported = Lighter version of supports
LL-Presupported = they are most lightly supported, working good with well calibrated printers, also leaving minimum ammount of scars on the model.
Hollowed versions only in LYS files.
Please consider to use them instead STL, they create less suction forces that means it minimise chance for failed print!
Cheers.
Happy Printing,
- Daniel Krasuski
Date published | 04/05/2021 |
Price | $8.00 |