GTech AirRam Mk 2 Wall Hanging bracket
GTech AirRam Mk 2 Wall Hanging bracket
Published 2019-11-05T11:50:59+00:00
Gtech AirRam Hanging bracket
IMPORTANT I found these work well BUT leave marks on the Gtech
These are to hang a GTech AirRam Mk2 from a wall.
3D Print long side left to right as shown in the Cura Pictures above.
Video
GTech AirRam Wall Bracket Improved. Since this video I have improved the brackets by changing the bolt hole into a slot to allow for adjustment on the wall.
https://youtu.be/8Z83cmrLjmQ
See it in use:-
https://www.youtube.com/watch?v=8Z83cmrLjmQ&t=354s at 5 minutes and 54 seconds
.
The brackets have a part to grip under the Gtech AirRam D Shaped handle so they will not splay apart.
They are should be strong enough with 0.2 Layer Height. 2.4mm Walls and 50% infill.
Fit one the match the other side to fit.
Date published | 05/11/2019 |
Support Free | YES |