Halloween Cauldron
Halloween Cauldron
3D
Published 2024-03-28T13:27:00+00:00
Hey everyone!
Here's a quick Halloween Design I figured could be used for a number of reasons! This design prints support free and comes with an optional locking lid. It is designed at a pretty small scale and the locking feature may struggle if scaled down any smaller, but feel free to scale it as big as you want!
*Note: The cauldron does print upside down as it will import, the bottom of the cauldron will bridge. I've tested it on multiple printers and it looks great, but if you are having trouble you could add some supports to the bottom center of the cauldron.
**These designs are uploaded with a non-commercial license. Printing this file does not grant you the right to sell commercially.
If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
https://www.patreon.com/thinair3D
Printing Info:
These are just the settings I used to test the model, feel free to use whatever settings work best for you.
FDM or Resin: FDM
Scaling: Can be scaled up, scaling down may cause issues with the articulation points.
Supports: None
Infill/Perimeters: 15% infill + 2 perimeters. Use 3 perimeters for extra strength.
Nozzle Size: 0.4
Layer Height: 0.2 (Adaptive layer height if you can, or the smaller the layer height the better.)
Printing & Assembly:
No supports needed! The cauldron and lid are already oriented the way they need to print. The cauldron itself will have some long bridging inside because it prints upside down, but I have found the quality to be great regardless. If you experience issues, you could choose to add some center supports, but I haven't found them to be needed on multiple printers.
| Date published | 28/03/2024 |
| Support Free | YES |