HeadPhone Holder / Wall mount
by DaniYanakiev
HeadPhone Holder / Wall mount
138
views
0
downloads
Add to collection
0
0
0 comments
Loading comments... 
HeadPhone Holder / Wall mount
Published 2019-02-26T21:01:05+00:00
OR
Save for later
Description
Printed on Wanhao Duplicator I3 v2.1
230 degree on nozzle
0 on bed with glue
It`s printed on glass that`s why my bed is cold.
M5 Hole for wall mount1
--------------------------------------------------------------------------------
My print settings
Quality : 0.15 mm
Material : PLA - 230 degree nozzle / 0 degree bed
Speed : 45mm/s
Support : For me Yes , if you find better possition without support do it!
Build Plate Adhesion : Brim , 5 mm
---------------------------------------------------------------------------------
With this Setting print time for my printer is ~ 6 hour
Technical Information
| Date published | 26/02/2019 |
| Benoetigte Zeit | - 6 Minuten |
| Menge an Filament | 42 |
| Dimensionen | 50X50X55 mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |
Object Parts
|
Easy print. Some supports are needed when printed with the square to the bottom but very easy to remove. It's printable without supports too but the result it better if you turn supports on. No rafts.