Insulation Load Spreading Retaining Washer
1,358
views
56
downloads
0 comments
Loading comments...
Insulation Load Spreading Retaining Washer
3D
Published 2020-11-24T11:25:34+00:00
2
0
Add to Collection
Description
Spread the load / increase fixing area when mounting insulation/plasterboard with screws. 60mm Diameter.
TIP: Print without supports by moving 1mm below the build plate (z-axis -1mm).
There is an additional 1mm deep notch on that side that faces to insulation, this adds even more support like most retaining clips. However, it becomes more difficult to print, so far I've never needed it. Printing at 0.2 or 0.3mm doesn't seem to affect practical usage.
Lizenz
Printing Details
### Supports
no
### Resolution
0.3
### Infill
20
### Misc Notes
Print without supports by moving 1mm below the build plate (z-axis -1mm).
Technical Information
Date published | 24/11/2020 |
Benoetigte Zeit | 25 - Minuten |
More Information
Object Parts