KS2AZT01 – Aztlan Core Set
$1.00 KS2AZT01 – Aztlan Core Set
Published 2020-07-18T02:40:02+00:00
Aztlan 1 Reforged is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. This set includes the starter STL models you’ll need for Aztlan rooms, multiple levels, and a grand temple entrance. It is compatible with all other DragonlockTM models. In our World of Aach'yn, Aztlan is the home of the Azite Snakefolk and is filled with primal terrors of unspeakable horror. Warring tribes of Azite fight over the control of tombs old and new, while interlopers are disposed of without a morsel of mercy. This set has been expanded with 4 new models from the Aztlan Awakens Kickstarter.
All of the terrain tiles use the dragonbite connector.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Date published | 18/07/2020 |
Price | $1.00 |
Support Free | YES |