Laser Cutter TPU Pin for Honeycomb Beds
Laser Cutter TPU Pin for Honeycomb Beds
Published 2023-06-19T05:10:21+00:00
I made these flexible 'pins' to easily hold down materials on the bed of my GweikeCloud Pro 50W Laser Cutter. It should work reasonably well on other laser cutters as well, provided they have a similar honeycomb bed with roughly 6-7mm holes... or you can scale the design in the X/Y directions to work with other sizes as well. The 'pin' is 7mm and should slightly flex the honeycomb so it stays in place.
Should work fine with most flexible filaments.
Gweike Cloud Pro II 50W CO2 Laser Cutter & Engraver w/ Rotary : https://bit.ly/Gweike50
*Use code MAKEANYTHING for $200 OFF*
- Also available through Geekbuying.com : https://bit.ly/gbGweike
Probably worth printing solid for longevity, since it's such a small and quick print!
Date published | 19/06/2023 |
Support Free | YES |