Modern Self Watering Planter
Modern Self Watering Planter
Published 2022-03-07T10:50:05+00:00
This is my first two piece self watering pot concept design. It's inspired by many similar self watering pots.
Designed for small plants to be printed in one go on a Prusa Mini.
If it's not water tight you could try either wood filler or a resin coat on the inside. Personally I used two coats of a UV resin and then put it outside for a bit.
This is my first upload so please let me know what you think :)
- Print with at least 4 perimeters to make sure you have no solid infill in the walls. This makes it more likely to be water tight.
- Print with 100% infill so the first few layers are solid.
Can be scaled up or down, just keep tolerances in mind. (if you scale the outer shell to 50% you'd need to scale the inner shell to around 46%, likewise if you'd like to scale to 200%, scale inner shell to around 205%
Date published | 07/03/2022 |
Dimensionen | 130mm x 70mm x 91mm |
Support Free | YES |