Modi Counter - Modi Boxi Test Print
Modi Counter - Modi Boxi Test Print
3D
Published 2024-03-12T16:08:52+00:00
The Modi Counter is a valuable test print for the Modi Boxi system. (Think of it as our Benchy!) It will not only let you know if your printer is tuned up but also be a useful counter for your tabletop games!
The file consists of a single Level 1 Modi Bolt (patent pending), a counter housing, a counter, and a Modi Bolt tool. If you can print all of these pieces, you should have no problem printing the rest of the entire Modi Boxi system.
See PRINTING TIPS if you have problems.
If you have any problems or want to show off your Modi Counter print, join our Discord at https://discord.gg/McGUrqfPMn
If this is your first time learning about Modi Boxi and would like to acquire the entire system, you can pre-order at: https://igg.me/at/modiboxi/x/37092402#/
Recommended Print Settings:
Nozzle: .4
Layer height .2
Filament type: PLA
infill: 15%
If you print these files and are having problems, you can try these things:
- If the Modi Bolt does not fit into the counter housing, it's possible that your 3D printer is extruding too much materials, and the flow rate needs adjustment. You can learn about that here: https://www.3dmakerengineering.com/blogs/3d-printing/flow-rate-calibration.
- If the bolt is too loose, you may have the opposite problem, and your flow rate needs to be increased.
- There is a good video about flow rate adjustment here as well: https://www.youtube.com/watch?v=HGO9k9d834w
| Date published | 12/03/2024 |
| Support Free | YES |
Nice first print. Moves perfectly.