Take a sneak peek to the MDS System in its first stages in the video above

If you are interested in the MDS Race System take a look to the next video

Old Price: 32.00

Here you will find all MyDigitalSlot curve track parts, including single-lane (SL) and dual-lane (DL) parts, 22.5º, 45º and 90º versions for some of the parts, but not only; You will also find here the side accessories for those track parts, Pianos and P-Walls, included for all the curves ;)

These track parts can work in both analog / digital systems, and can be compatible with other existing commercial track parts using the right adaptors.

This pack is the cheapest way to get all the curve parts and the only way to get some "special parts" as the R2R3 and R4R5 Dual-Lane curves.

If you want it all, the All Straights Pack and Lane-Changers is what you need. If you plan to buy these 3 publications, ask me for a discount and I will create it for you if you can't wait until I publish a "mega-combo pack" with these 3 publications.

Of course, you will need to add copper tape to each track part. Please look for a double-side conductive one, so you can use it also to "bridge" some connections.

You will find the list of STLs included, the same as their weight and fast printing time at the end of this publication!

To complete the connection system you will also need (Included):
- MDS_TRACK_CLIP_Track (To connect track parts)
- MDS_TRACK_CLIP_Pianos (To interconnect pianos)

They are compatible with the next adaptors (NOT INCLUDED):
- MDS_TRACK_ADAP_SCA_CLASSIC_SL_STR45_FEMALE
- MDS_TRACK_ADAP_SCA_CLASSIC_SL_STR45_MALE
- MDS_TRACK_ADAP_SCA_CLASSIC_DL_STR45
- MDS_TRACK_ADAP_SCA_SPORT_SL_STR45_ROUND
- MDS_TRACK_ADAP_SCA_SPORT_SL_STR45_SQUARE
- MDS_TRACK_ADAP_SCA_SPORT_DL_STR45
- MDS_TRACK_ADAP_SCX_GREY_SL_STR45
- MDS_TRACK_ADAP_SCX_GREY_DL_STR45

You will find attached a table with all the common track parts weights, needed bed sizes and printing times. Introducing the quantity of each track part you should be able to get the total weight and time to print.

MyDigitalSlot System, more than a track

This is part of a more complete work, a whole car racing Digital Slot System, including the track parts, controllers, car chassis, electronics and bodies. The same way various digital accessories like "Info Screens" with cars and race information, synchronized start lights system, RGB lighting, and probably an app and HDMI output will be available.

The main idea is to be able to print, build and use a full RC Car Slot Digital Racing System which is independent from market typical trades. Anyway you can use the different parts of the system in many ways.

The main features of MyDigitalSlot System are:

- Lap count
- Fuel and Health systems
- Racing system without base controller, just with cars and their controllers
- Race configuration and invitation system just with your controller!
- Stop and Go system for race starts and accidents
- Speed Cap system for low health or fuel

- Wireless and rechargable controllers
- Enter / Exit Pit Lane detection, you need to stop there to restore full fuel / health levels

- Cars can run in both directions in the same lane
- Cars with full configurable lights, including dimming rear/brake lights, Left and Right Blinkers and Front Lights
- Cars can control various servos, a XYZ gyro, IR lights and sensors and the motor driver

More features are coming, but I will need a great bunch of feedback, I hope yours too, to take the whole system to a more profesional, next level.

System Versatility

You can use the track parts to build and drive your analog or digital cars, you can mix the parts with older or newer Scalextric parts using transition/adaptor parts. You can also use the MyDigitalSlot cars and controllers in those commercial tracks, but the "digital" system accessories of those commercial tracks probably won't work.

The electronics involved in the controllers, cars and digital track parts are quite simple and easy to source, like cheap arduinos, resistors, diodes, leds, RGB digital leds, pots and a few more things.

I have made the car and "lane-changers" work in two different modes, one would be compatible with "mechanical" lane-changers like in Scalextric Digital System, WOS or Advance.
The other mode would be the "InfraRed" mode, in which the "lane-changers" will move when they receive IR light from a car. In this case, you won't need the "line-changer actuator" in the car but you will need electronics under each lane-changer track part, specially the "sensors" and the "actuator".

There is a very good thing about the InfraRed lane-changers... You can use both mechanical and IR systems simultaneously, I mean, one car can change lane mechanically and the next one could use the IR led to change lane.

You CAN'T use "mechanical lane-changer cars" with old Scalextric track parts (black) but you can use "IR lane-changer cars" and complete your track with all those old track parts you had around there from many years ago.

Printing a big track could take many many plastic (various KG) and hundreds of hours of 3D printing, so this InfraRed lane-changer system in combination with your old black track parts could be the most economically interesting solution from my point of view.

If you give it a try to MyDigitalSlot you will be welcomed to my Discord Server to ask, show or suggest any change to this DIY 3D Printable Digital Slot System, but you can also use the comments of this publication if it makes sense.

LIST OF INCLUDED PARTS

BLACK MAIN TRACK PARTS: Bed Size Weight Time

MDS_TRACK_CUR_SL_R1_90 142x142   23   56
MDS_TRACK_CUR_SL_R1_45 100x100   13   32
MDS_TRACK_CUR_SL_R2_90 223x223   41   98
MDS_TRACK_CUR_SL_R2_45 158x122   22   52
MDS_TRACK_CUR_SL_R3_45 215x146   30   71
MDS_TRACK_CUR_SL_R3_22 120x100   16   40
MDS_TRACK_CUR_SL_R4_45 271x171   38   91
MDS_TRACK_CUR_SL_R4_22 148x105   21   50
MDS_TRACK_CUR_SL_R5_22 180x111   24   58
MDS_TRACK_CUR_SL_R6_22 210x117   29   69

MDS_TRACK_CUR_DL_R1R2_90 223x223   63   147
MDS_TRACK_CUR_DL_R1R2_45 180x160   33   77
MDS_TRACK_CUR_DL_R2R3_45 215x203   49   116
MDS_TRACK_CUR_DL_R3R4_45 272x227   65   151
MDS_TRACK_CUR_DL_R3R4_22 180x150   35   83
MDS_TRACK_CUR_DL_R4R5_22 186x180   43   101
MDS_TRACK_CUR_DL_R5R6_22 210x190   51   120

WHITE PIANO PARTS:              Bed Size Weight Time

MDS_TRACK_PIANO_R1_ext45 128x82     9.7     23
MDS_TRACK_PIANO_R1_ext90 180x180   18.7   45
MDS_TRACK_PIANO_R1_int45  43x52       3.3     8
MDS_TRACK_PIANO_R1_int90  67x67       5.8    14
MDS_TRACK_PIANO_R2_ext45 184x105   14.2   34
MDS_TRACK_PIANO_R2_ext90  260x260  27.7   67
MDS_TRACK_PIANO_R2_int45  100x70     7.7    18
MDS_TRACK_PIANO_R2_int90  141x141   14.6   35
MDS_TRACK_PIANO_R3_ext22 131x65     10.1   24
MDS_TRACK_PIANO_R3_ext45 241x128   19.4   47
MDS_TRACK_PIANO_R3_int22  85x60      6.6     16
MDS_TRACK_PIANO_R3_int45  156x100  12.3   30
MDS_TRACK_PIANO_R4_ext22 162x70    12.4   30
MDS_TRACK_PIANO_R4_ext45  297x151 23.9   57
MDS_TRACK_PIANO_R4_int22  115x69    9        22
MDS_TRACK_PIANO_R4_int45  213x125  17.2   41
MDS_TRACK_PIANO_R5_ext22 192x76    14.6   35
MDS_TRACK_PIANO_R5_int22  146x75    11.2   27
MDS_TRACK_PIANO_R6_ext22 222x82    16.8   40
MDS_TRACK_PIANO_R6_int22  177x80    13.4   32

GRAY WALL PARTS:                   Bed Size Weight Time

MDS_TRACK_P-WALL_R1_ext45  141x73    17      48
MDS_TRACK_P-WALL_R1_ext90  200x200   33.3  96
MDS_TRACK_P-WALL_R1_int45   20x14      1.5    11
MDS_TRACK_P-WALL_R1_int90   20x20      2.1    13
MDS_TRACK_P-WALL_R2_ext45  198x96    24     69
MDS_TRACK_P-WALL_R2_int45   71x47      8.2    23
MDS_TRACK_P-WALL_R2_int90   104x104  15.7  45
MDS_TRACK_P-WALL_R3_ext22  138x45    16     45
MDS_TRACK_P-WALL_R3_ext45  255x120  31.4  90
MDS_TRACK_P-WALL_R3_int22   70x40      8      23
MDS_TRACK_P-WALL_R3_int45   127x74    15.2  43
MDS_TRACK_P-WALL_R4_ext22  169x52    19.1  54
MDS_TRACK_P-WALL_R4_ext45  245x245  37.6  108
MDS_TRACK_P-WALL_R4_int22   100x47    11.4  32
MDS_TRACK_P-WALL_R4_int45   184x100  22.1  63
MDS_TRACK_P-WALL_R5_ext22  200x58    22.3  63
MDS_TRACK_P-WALL_R5_int22   130x53    14.9  43
MDS_TRACK_P-WALL_R6_ext22  176x176  25.8  74
MDS_TRACK_P-WALL_R6_int22   161x59    18.1  52