Balloon Powered Nutcracker
Balloon Powered Nutcracker
Published 2014-11-24T09:28:53+00:00
Support free design competition
Product design
Crazy Christmas nutcracker Have great fun cracking nuts this Christmas with this balloon powered nut cracker, just insert the nut and pull it back inside the balloon then let go, sending the nut smashing into the base, with just a couple of tries you’ll find the perfect power level to just crack those nuts open. Why not print out several and give them as fun presents that will keep friends and family amused for hours on end. Uses a standard size party balloon that you cut the end off and then role it a over a couple of times to thicken it before stretching it over the top edge of the body.
Layer height 0,25mm Infill base 50% infill body 20% Support 0%
Christmas nut cracker from Reg Taylor on Vimeo.
Print at 0.25 mm layer height, with 50% infill. This uses 94 g of filament and takes 405 minutes.
Date published | 24/11/2014 |
Benoetigte Zeit | 405 - 405 Minuten |
Menge an Filament | 94 g |
Dimensionen | 70 x 70 x 90 mm |
Schwierigkeitsgrad | Very Easy |
Support Free | YES |