Osu keypad (3 keys)
1,710
views
70
downloads
0 comments
Loading comments... 
Osu keypad (3 keys)
3D
Published 2021-09-14T12:44:12+00:00
6
0
Add to Collection
Description
A simple osu keypad with 3 mechanical keys using an arduino pro micro.
- Clip in place the mechanical switches (MX style)
- Solder one pin of each switch to ground and the other to its own pin (2,3,4 is the default). Make sure you don't short the board.
- Secure the arduino and close the lid
- Adit the arduino sketch to match your key pins at the top, change the key codes to your liking, compile it and flash to the board via arduino IDE.
- Add keycaps and have fun !
You can also optionally add 3 leds, one for each switch and modify the sketch to match the pins you used. Just make sure your led comes from a free pin and goes to ground.
Inspired by osu!keys by kappachino on Thingiverse.
If MMF blocks the arduino sketch, you can find it on this object's thingiverse page : https://www.thingiverse.com/thing:4967074
Lizenz
Technical Information
| Date published | 14/09/2021 |
| Support Free | YES |
More Information
Object Parts