PARASEYE [SUPPORT FREE]
![PARASEYE [SUPPORT FREE] image](https://cdn2.myminifactory.com/assets/object-assets/66320e6447d314.75047495/images/70X70-paraseye-01.jpg)
![PARASEYE [SUPPORT FREE] image](https://cdn2.myminifactory.com/assets/object-assets/66320e6447d314.75047495/images/70X70-paraseye.jpg)
PARASEYE [SUPPORT FREE]
3D
Published 2024-05-01T16:51:28+00:00
files included: STL & LYS (Lychee File)
A) For personal use only.
selling or sharing of STL / digital files is prohibited
molding & casting of prints is prohibited
altering my digital sculpt & calling it as yours is prohibited
using my digital sculpts or part of it to make new content is prohibited
B) If you want to sell prints, please subscribe to [Bacon - Merchant] at https://www.patreon.com/PorkYoo
note: unsubscribing to [Bacon - Merchant] disables your license to sell prints
C) please credit the artist & link the page, whenever you share photos or videos of your prints. doing this helps the artist greatly.
thank for your support
printer: Creality LD-002R
resin : Anycubic Standard Grey
Lychee Slicer
[Burn In Layers]
Number of Layers: 10
Exposure Time: 50s
Transition Layers Count: 0
Light-off Delay: 0
Lift Distance: 5mm
Lift Speed: 65mm/m
[Normal Layers]
Layer Thickness: 0.05mm
Light-off delay: 0
Exposure Time: 9s
Lift Distance: 5mm
[Speed]
Light Speed: 65mm/m
Retract Speed: 150 mm/m
[note]
it's always a good practice to finalize your CTB/Sliced files with UVtools, before printing.
| Date published | 01/05/2024 |
| Support Free | YES |