Picatinny Mounted 2x AAAA Battery Holder
$5.00 Picatinny Mounted 2x AAAA Battery Holder
3D
Published 2022-02-04T09:46:37+00:00
A simple 2x AAAA (Quadruple A) battery holder clamp that attaches to standard picatinny/weaver rails. Held in pretty secure.
Push bottom (negative terminal) of battery into bottom 'cup', then apply pressure to positive terminal to click into place unter the tab notch. Remove by opposite process--pulling positive end out first, then sliding out of negative terminal 'cup'.
Size: 5cm (length) x 3.1cm (width) x 2.4cm (height)
Secure into place on the rail with a standard 6-32 machine screw & nut
Good for airsoft, paintball, milsim, or any actual real-steel use for stuff like target practice or hunting.
(Note: Model photos are pictured on a King Arms P90 Airsoft setup)
Needs supports to be printed; used mine with 2mm tree supports w/ 4mm base 4mm height. Recommend ABS with 100% infill
Needs supports to be printed; used mine with 2mm tree supports w/ 4mm base 4mm height. Recommend ABS with 100% infill
| Date published | 04/02/2022 |
| Price | $5.00 |
| Dimensionen | 5cm (length) x 3.1cm (width) x 2.4cm (height) |