Scalar - AllInOne HotEnd Holder
Scalar - AllInOne HotEnd Holder
Published 2017-10-03T11:35:06+00:00
Those parts ore compatible with Scalar Family 3D printers and AllInOne Hot end . This hot end can be found here: http://hotends.fr/
There are 3 parts:
1-Scalar - AllInOne_Base _v2.stl the base part that can be fixed on the X carriage
2-Scalar - AllInOne_Block_inductor_v2.stl the inductor block, capable of holding inductive probe
3-Scalar - AluHotEnd_Top.stl: the top part that can accept a Pneufit connector with 1/8" thread
Updates:
2016.03.03: Hot end top (pneufit holder) has been updated with wider screw holes
2015.12.12: Added some holes to help airflow to go through hotend heatsink
2015.12.09: Add blower fan support
2015.11.25: Increase side holes for screws, they were slightly too tight.
Have a great printing experience!
3D Modular Systems
Evolutive 3D Printers
http://www.3dmodularsystems.com
Twitter: https://twitter.com/3dmodularsystem
Youtube: http://www.youtube.com/c/3DModularSystems3DPrinters
Scalable model printed with standard settings. Dimensions, time to print and material quantity refer to the object I made.
Date published | 03/10/2017 |
Benoetigte Zeit | 90 - 120 Minuten |
Menge an Filament | 30g |
Dimensionen | 85x124x61mm (on buildplate) |
Technologie | FDM |
Schwierigkeitsgrad | Easy |
Support Free | YES |