Seven Deadly Sins Chastiefol spear redesign
Seven Deadly Sins Chastiefol spear redesign
3D
Published 2024-03-01T15:10:01+00:00 • Remixed from Chastiefol (King's Spear) - SevenDeadlySins
This is my redesign of the great work from Adam Ubel @fallen empire. His original design was to try and fit a 3/16in wooden or metal rod through the length of the spear. I found it to be to flimsy and wanted to make it more robust for conventions to make sure theres a smaller chance of breaking. I made it so you can fit a 1.25 inch wooden dowel rod through the whole thing and slide the printed parts over it. The speadhead pieces takes two small 3/16 inch dowel rod pieces to help align the parts. and incase you cant find a wooden dowel rod long enough for the height you want, I added a small jig to help you drill a 3/8 inch center hole in the main body dowel rod so you can join two rods together to make it longer and sturdier.
I was able to print this on my Bambu X1C with 10-15% infil and supports on one part of the spear tip. Like @fallen empire had in his upload, I split all pieces to be able to fit most printers.
| Date published | 01/03/2024 |