KS3SHP15 - Banning Class Bi-Plane
$1.00 KS3SHP15 - Banning Class Bi-Plane
3D
Published 2021-08-25T10:05:45+00:00
The Banning Class Bi-Plane was sculpted by Colin Christenson late in the campaign as a tribute to the first non-stop transcontinental flight performed in 1932 by James Banning and Thomas Allen. James and Thomas were the first African-American pilots to fly across the continental United States. James was passionate about flying in an era when everyone told him to stop dreaming. The spirit of those who do when others say to give up will forever empower us at Aether Studios. This model prints in only 6 supportless parts.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 25/08/2021 |
| Price | $1.00 |
| Support Free | YES |
Printed example.