Soap dish “bubbles”
599
views
2
collections
0 comments
Loading comments...
$3.00 Soap dish “bubbles”
3D
Published 2023-06-30T11:22:29+00:00
7
0
Add to Collection
Description
Would you like to support my work? :)
Become a member to get access to my full catalogue with exclusives, early access and discord benefits
An elegant soap dish with drainage in the style of my bubbles series.
Cleaning: Empty out the drain when it is full. I advise to clean the product (as you should do with every soap dish) a few times a year. Best results are achieved with a regular old toothbrush. Scrub it for a minute or two under running warm water.
Size assembled ca: 105 x 105 x 15 mm
Printing Details
- Required build volume: 110 x 110 x 20 mm
- Material usage: 45g in total
- Print time: 4-5 h in total
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 20%
- Build plate adhesion type: none
- Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Technical Information
Date published | 30/06/2023 |
Price | $3.00 |
Support Free | YES |
More Information
Object Parts