Spiraled Christmas Tree, Vase Mode, Christmas Decor by Slimprint
Spiraled Christmas Tree, Vase Mode, Christmas Decor by Slimprint
Published 2021-12-13T09:47:36+00:00
This Spiraled Christmas Tree is the perfect way to get your home in the Christmas spirit. It's a quick and easy-to-print model that will add some holiday cheer to any room.
The Christmas Tree consists of 2 parts.
The base of the Spiral Tree, which is designed to be printed in Vase Mode (aka spiral vase in PrusaSlicer and spiralize outer contours in Cura).
And the tree topper, which is divided into two halves that can be attached to each other with glue, after printing. The halves have to be printed with the flat side facing the build plate.
Size: 11.7 x 20.5 (with tree topper) Scale as you like :)
Weight: 50 - 150 grams
Print time: Base - 2.5 - 5 h | Tree topper: 15 - 30 min
Happy printing & Merry Christmas!
Feel free to share it with your family or friends, but this model is NOT intended for commercial use. I just love sharing this with the community. :) Thanks for your understanding.
Update 22-12: I've uploaded a scaled down version of the star (V2).
Base
Nozzle size: 0.4 (preferably larger)
Layer height: 0.2 - 0.4 mm
Layer width: 0.6 - 1.2 mm
Print speed: 30 - 40 mm/sec
Tip: Print hot (+5 - +10 degrees) for improved layer adhesion
Vase mode enabled for the base
Tree Topper
2 - 3 perimeters
10% infill
Vase mode DISABLED
Date published | 13/12/2021 |
Benoetigte Zeit | 180 - Minuten |
Menge an Filament | 50 - 150 grams |
Dimensionen | 117 x 205 mm |
Support Free | YES |
Creality Ender 5 PLA - Smartfil SNOW 100%