Star Wars - Darth Vader Support Free Remix
Star Wars - Darth Vader Support Free Remix
3D
Published 2021-08-04T07:37:17+00:00 • Remixed from Star Wars - Darth Vader - 30 cm tall
Great original model by Printed Obsession. This is a support-free, FDM-friendly remix of the model. No supports are required in the model and it can be printed very easily. The red light of the saber can be printed separately and then glued to the saber. Check out the 3D print timelapse to see it in action. Timelapse Link
Follow me for more cool, support-free 3d printing designs & timelapses on:
YouTube: youtube.com/robin3dverse
Instagram: @robin3dverse
Print and share your prints on Instagram!
You can credit my remix via @robin3dverse and tag me!
Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 8%, Gyroid
Print Speed: 40 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: No
Print Time: 12 hrs 40 min
| Date published | 04/08/2021 |
| Menge an Filament | 70 grams |
| Dimensionen | 100.1mm x 100.1mm x 125.01mm |
| Support Free | YES |
Followed the printing details as listed w/ 185mm Z height, AnyCubic Black PLA. That is one big hand.... Thanks for the file!