"SWISS KNIFE" CELL HOLDER / PHONE STAND
$3.20 "SWISS KNIFE" CELL HOLDER / PHONE STAND
Published 2021-12-26T10:42:29+00:00
Almost everybody had a swiss knife once in his life... Its an icon, everywhere in the world...
So i tought i'd make something useful, while being inspired by this iconic object i had in my life for the past 30 years...
Here ya go! Swiss knife inspired cell holder... Fits easily inside any pocket.
Everything is easy to print, and only a few parts required supports. The main body and the two back braces.
The parts are already placed on the bed in the best orientation.
You will need some screws to complete the assembly:
-M4x12mm (4x)
-M3x12mm (4x)
Because the holes are self threading, you can use imperial equivalents if you want with no problems (like 8-32 and 6-32). ;)
Assembly instructions included.
Have fun!!
COMMERCIAL USE NOT ALLOWED
3D PRINTING SETTINGS:
As i always say: You know your printer better than me. So use you best setup, but here's some clues on what i used:
0.2 layer height
20% infill with minimum 4 walls (i suggest 5)
215 temp
50mm/s on visible parts.
60mm/s on main body
Date published | 26/12/2021 |
Price | $3.20 |