The Three Pillars of the Jedi
The Three Pillars of the Jedi
Published 2023-02-13T11:32:16+00:00
Just print flat on the back how they are already oriented, no supports needed. There is a keyhole slot on the back so they can be hung up, or displayed on a desk.
**This design is uploaded with a non-commercial license. Downloading this file does not grant you the right to sell commercially.
If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
https://www.patreon.com/thinair3D
These are just the settings I used to test the model, feel free to use whatever settings work best for you.
- FDM or Resin: FDM, or large format resin.
- Scaling: Current size is 72 x 134 x 20.
- Supports: No supports
- Infill/Perimeters: I used 10% with 2 perimeters. They are only decorative so you could probably use less.
- Layer Height: I used 0.20 and they came out great. You should be able to use a higher layer height with no difference.
Date published | 13/02/2023 |
Support Free | YES |