Trollskull Manor - Kitchen and Pantry
Trollskull Manor - Kitchen and Pantry
3D
Published 2022-02-26T10:29:19+00:00
*Update
New .stl added, issues fixed: floor where it met some walls, inconsistent depth of the stone outer walls, walls are countersunk to provide better finish & magnet holes have been added in place of the squares.
Welcome to the kitchen, pantry and front entrance of Trollskull Manor from Waterdeep. The manor is enormous and only the kitchen, pantry and front door fit on my Prusa. There will be more of the structure posted as it is developed. This file is one. single. print. One file.
The base is developed with OpenLOCK and the roof support beams are designed for magnets. The fireplace has a space for an LED light, which is in development.
In addition, the doors are missing from the print file. Once they have been printed I will also add those for download.
The inside walls are in the Tudor style while the outer walls are skinned in stone (it's primarily a kitchen, right). The bottom of the print has a few recesses - I designed them for magnets in case I can find some decent magnetic paint for the furniture so they don't fly all over the place when someone sneezes.
The print took approximately 56 hours in PLA. It does require supports as the roof timbers come out at a 90 degree overhang. I used the supports automatically generated by PrusaSlicer.
I apologize for the quality of the photos, I'm just starting out with 3D printing and glamour shots.
| Date published | 26/02/2022 |
| Benoetigte Zeit | 56 - Minuten |
| Menge an Filament | 341g |
| Dimensionen | 190mm x 155mm x 110mm |