Vaccine Heart Earring or Charm
Vaccine Heart Earring or Charm
3D
Published 2021-04-15T11:51:25+00:00
I got my first dose of the Moderna vaccine a week ago, and started designing this while I rested afterwards.
There are two versions of this: a 20mm small, earring-sized version, and a larger version with a bit more detail. I wanted the 'liquid' area to be easy to dab a bit of paint or nail polish into, so they have a walled-off recess. (I would love to see a dual extrusion of this also!)
***
I posted more variations on the design here including one without a heart shape and ones that are better for making into pins.
***
It's designed to be printed at 0.2mm layer height, 0.4 nozzle width; if you want to print it finer, it would be easiest to try 0.1mm height instead. (The model layers are multiples of 0.2mm in height, and horizontal details are generally at least a tiny bit bigger than 0.4mm to help slicers cooperate.)
You can hang these from either loop in the heart; the one directly above is slightly thicker and thus sturdier and will hang roughly perpendicular; the bigger loop will make it hang more diagonal.
I would love to see any prints you make!
Note: I have no idea if this works with resin printing, but I would also love to see if you try that or adapt the design.
FFF/FDM printing settings: 0.2mm resolution, 2-3 perimeters, any infill should be solid infill, no supports needed, no raft needed, PLA
Some FFF/FDM troubleshooting, particularly for printing the earring size:
-you probably want to apply fresh adhesive
-I've been finding 'print outer/external perimeter first' helpful for the first layer of these
-for stringing: you may want to slow down your non-print travel speed, and/or see if you have retraction turned off for tiny distances.
-as always, be careful and patient when removing tiny prints from your build surface.
| Date published | 15/04/2021 |
| Benoetigte Zeit | 4 - Minuten |
| Menge an Filament | 0-1g |
| Dimensionen | 20mm or larger |
| Support Free | YES |